KuM multifunctional cultivator

The KuM multifunctional cultivator has a universal strong frame for inter-row cultivation, destruction of the soil crust, removal of weeds and fertilizing in 6,8,12, XNUMX, XNUMX-row crops.

The inter-row adjustment interval from 45 to 70 centimeters allows the use of KuM on corn, sunflower, castor and other row crops.

Key features

THE VERSATILITY OF KUM

With high frame clearance.

The cultivator has a frame with a clearance of 75 cm, which ensures high productivity even on tall crops without damaging them. The inter-row processing interval can be easily adjusted by moving the working section block along the frame.

Working section with arrow legs

Working section with arrow legs

A section with five arrow legs is usually used for early spring loosening of young crops with 100% overlap of the inter-row space. This operation removes the soil crust and weeds in the rows.

WORKING SECTIONS ARE MOUNTED ON A PARALLELOGRAPH

Precise adherence to depth in any conditions.

Separate working sections are attached to the frame using a parallelogram. The parallelogram copies the relief and precisely maintains the specified working depth of the cultivator. The parallelogram completely excludes transverse movements caused by unevenness.

EASY SETUP

Row spacing and working depth.

The distance between individual working sections can be easily changed by loosening the bolts that connect the main frame of the unit to the working sections and moving them along the frame.
The working depth can be set from 2 to 12 cm.

STABILIZATION AND SUPPORT WHEELS

Cultivator KuM is equipped with stabilizing wheels that keep the cultivator in rows. Each working unit has its own support wheel, which helps to maintain the specified working depth and to copy the terrain

APPLICATION OF LIQUID FERTILIZERS

Cultivator KuM can be equipped with a hopper with a volume of 500 liters. for applying liquid mineral fertilizers

APPLICATION OF BULK FERTILIZERS

On the KuM cultivator, it is possible to install fat hoppers for applying bulk fertilizers with a capacity of 220 liters. Bunkers have a total capacity of 880 liters.

Different types of working bodies

Different types of working bodies.

You have the opportunity to choose different types of working bodies to solve any problems

BUSHING FROM COMPOSITE MATERIALS

The use of composite materials ensures the reliability and durability of the unit. The bushings are made of TEKRONE composite material.
The high-strength TEKRONE® cannot be overestimated where low friction is required together with high resistance to dirt, dust and abrasive particles. Possessing the property of self-lubrication, the material perfectly manifests itself in the so-called "dry sliding" applications, where it interacts in an exemplary manner with steel, copper and other materials.
TEKRONE® is a high-strength composite material belonging to thermoplastics, a material of the latest generation. TEKRONE® has excellent characteristics and unique abilities. First of all, it is high shock resistance, which is not lost even under the influence of low temperatures.
The remarkable characteristics of the revolutionary material do not end there! Another one of them is a very high abrasion resistance. Even steel is inferior in this parameter twice!

Finger-type working organs

Finger-type working organs

As an additional option, working bodies of the finger type can be installed. They are installed to cultivate the interrows where the paw has not worked and to destroy weeds that are located too close to the plant. At the same time, the root system of the main crop is not damaged.

Distance between working bodies

The distance between the working bodies is increased specifically so that weeds and plant residues pass without problems and do not clog.

Double spring on a parallelogram

Double spring on a parallelogram

High effort, deepening of the working organs.
In the standard configuration, two springs with three levels of adjustment are installed on all parallelogram mechanisms. As a result, the pressure of deepening is up to 150 kg per section, which ensures a better progress of the section even with high speed of the cultivator and increased hardness of the soil with a soil crust.

The height of the passage of the frame

The height of the frame passage up to 75 cm allows working in high plantings (corn and sunflower, other crops). Thus, even at later stages of growth, weeding and fertilizing can be done efficiently and carefully.

Individual equipment of plowing section

Individual equipment of plowing section

Individual equipment of the plowing section with various elements of both soil cultivation and plant protection. Thanks to this assortment, the KUM cultivator adapts to any conditions, crops and soil properties.

Location of working bodies

Location of working bodies

The first row of working bodies is located under the parallelogram mechanism. Due to this, the working bodies deepen better even in difficult conditions.

A wide range of adjustment of the working depth

A wide range of adjustment of the working depth

A wide range of adjustment of the working depth.
Allows you to adjust each section separately.

Tanks for liquid fertilizers

Tanks for liquid fertilizers

Additional equipment with tanks for liquid fertilizers on the front attachment of the tractor is possible. 500 and 850 liters.

Spring feeding stand

Fertilizers

A section with a feeding rack

3D overview of the unit

Scroll the object to be able to view it from different angles

Row cultivator with liquid fertilizers

Row cultivator with loose fertilizers

CONCEPT

The concept of KuM

Zone No. 1 — Dizhlo

Pole

Zone #2 — Three-point suspension

Zone #3 — Support wheels

Zone No. 4 — Liquid fertilizer tank

Zone No. 5 — Dry fertilizer tank

Zone No. 6—Installation of working sections on a parallelogram

Cultivator KyM — Model line

Cultivator universal inter-row (KUM) 8-row 5.6 m.

Cultivator universal inter-row (KUM) 8-row 5.6 m.

Universal inter-row cultivator. (KUM) 12-row 9.8 m.

Universal inter-row cultivator. (KUM) 12-row 9.8 m.

Universal inter-row cultivator (KUM) with loose fertilizers

Universal inter-row cultivator (KUM) with loose fertilizers

Universal inter-row cultivator (KUM) with liquid fertilizers

Universal inter-row cultivator (KUM) with liquid fertilizers

Kum - 6M Hydraulic frame

KUM - 12 row 450 mm hydraulic frame

Configuration options

Side board

The side board provides (especially at an early stage) optimal protection of plants from backfilling.

Section with harrow disc

The harrow disc section is designed to loosen the soil and improve the penetration of oxygen to the plant's root system.

Section with a finger cultivator

Finger cultivators are used for dissection of the uncultivated weeding strip (including between cultivated plants) and for controlling weeds at an early stage of growth.

Tank grid

The net is installed on the top of the tank to prevent lumps of fertilizer from getting to the seeding mechanisms. Which, in turn, prevents clogging or breakage of sowing mechanisms.

A rack with a lifter

Raisers are designed for row spacing from 60 to 80 cm, which are mounted on the first or second beam of the section.

Spring feeding stand

Specifications

Parameter name	KuM-5.6	KuM-9.8
1. Productivity, ha/hour	until 10	to 16
2. Working speed, km/h	until 16	until 16
3. Width of grip, m	5,6	8,4
4. Depth of tillage, mm	to 80	to 80
5. Number of working bodies, pcs	9	13
6. Overall dimensions:
- in the working position, to
length, mm	7300	10300
width, mm	2400	2400
height, mm	1000	1700
- in the transport position, to
length, mm	7300	7300
width, mm	4330	2400
height, mm	2000	3000
7. Paw width, mm	150	150
8. Weight of the structure, kg	1300	1900
9. Connects to tractors, k.s.	from 80	from 150