SPRING HROWS ARE WIDE
SPRING EXTENDED Harrows (BSP) have been a proven tool for many years not only for high-quality mechanical care, but also as an alternative to chemical weed control. The field of application of BSP is very wide. Thanks to its successful application in the processing of grain, technical, vegetable, leguminous crops, and pastures, BPSh began to play a decisive role in modern agriculture. It is very important to harrow crops to destroy the soil crust, especially on heavy soils.
Spring harrows
The Agrokalina company produces two types of light spring harrows, which differ from each other in the type of fastening of the working sections and can be equipped with Ø6 or Ø7 mm springs.
1. On the first view spring harrow sections of working bodies are fixed on special cradles that ensure free movement of sections under their own weight.
2. The second type of harrow has a special floating frame to which sections of working bodies are fixed rigidly.
Key features
WORKING SECTION WITH SIX ROWS OF RAKES
For an intensive working effect.
The BPSH mounted harrow is distinguished by the simplicity of the unit design with a six-row section of rakes with 9 working bodies in each row. In work, this arrangement provides for an optimal step of the track between the rakes of 20 mm. Which provides a combination of high passability, processing accuracy and minimal impact on the plant.
RAKES WITH A DIAMETER OF 6 AND 7 MM.
Spring teeth 6 mm long 400 mm.
Spring teeth 7 mm long 520 mm.
They are optimal for harrowing the soil. This length of the teeth ensures perfect adaptation to the soil surface. These spring teeth are universal and suitable for different cultures.
Positive effects when using BPSH:
- Air circulation in the soil;
- Regulation of water balance (destruction of capillaries);
- Strengthening of basic culture.
USING BPSH, WHICH LEADS TO SUCCESS
- The success of BPSH in the fight against weeds is achieved by 70% thanks to the filling of weeds in the initial phase, and contributes to the retention and accumulation of productive moisture, air-gas exchange, and determines dynamic development at various stages of vegetation.
- The structurally determined mobility and vibration of the spring ensures high-quality loosening, weeding in the "white thread" stage, and at the same time has a gentle effect on the seedlings of cultivated plants.
- Competent and timely use of harrows significantly reduces the cost of growing agricultural crops, reduces costs for chemical treatment.
Harrowing
It is very important to harrow crops to destroy the soil crust, especially on heavy soils. As a rule, a large amount of precipitation in the period before the emergence of sprouts, hot dry weather leads to the formation of a soil crust, which prevents the access of air and complicates the germination of plants. As a result, the plants partially die, sprouts do not appear amicably. All this ultimately greatly reduces the yield and quality of crops.
Plowing of winter crops in spring
As soon as you can go to the field in the spring, you can harrow the winter crops. Do not rush, the ground should be dry. Harrowing in the spring has a number of advantages: thanks to the destruction of the crust in the spring, aeration of the soil is created and it warms up faster. This leads to a faster start of vegetation, strengthens the stem, and stimulates bushing. If the soil is harder and covered with a thicker crust, a rotary harrow should be used before harrowing Antox. After it, the soil becomes more loose and suitable for harrowing.
7 tips for "blind" harrowing
1. Take into account the depth of the sowing material and the depth of harrow processing.
2. Plan harrowing "blindly" already during sowing.
3. Check the work results.
4. Adjust the angle of attack of the teeth depending on the properties of the soil and its flowability.
5. The speed of cultivation should be chosen depending on the crop, the depth of sowing seeds, the type of soil and its looseness, etc.
6. The maximum processing depth during blind harrowing should be no more than 3 cm.
7. Carefully follow the harrowing and regulation in this way the farmer should gain his own experience to achieve the best result in his conditions.
When there is a risk of frost, harrowing is prohibited!
When harrowing in winter, it is necessary to ensure that after a few days there are no frosts, since harrowing reduces the frost resistance of the crop. Mechanical processing can increase the sensitivity of the crop to cold. Therefore, when there is a risk of frost, it is necessary to abandon harrowing.
Pitch of harrow teeth
The actual pitch of the teeth: 2,5 cm. The pitch of the teeth affects the way of processing. With six rows, there are 60 teeth per 1,5 m section. The basic condition for weed control is the minimum possible pitch of the teeth.
"Blind" harrowing in spring
"Blind" harrowing in spring has a very positive effect on crops, as weeds can be destroyed at the "white thread" stage. This approach is carried out between sowing and seedlings of the main crop. Deeper cultivation of the seed material ensures that the sprouts of the main crop will not be damaged.
It is at the "white thread" stage that it is possible to achieve the greatest effect in the destruction of weeds - 80%.
3D overview of the unit
3D overview of the unit
CONCEPT
Specifications
| Parameter name | BPSH-8 | BPSH-10 | BPSH-12 |
|---|---|---|---|
| 1. Type of unit | mad | ||
| 2. Productivity, ha/h | 8-9,6 | 9-12 | 11-14 |
| 3. Working speed, km/h | 8 10 ... | 8 10 ... | 8 10 ... |
| 4. Transport speed, km/h | to 20 | to 20 | to 20 |
| 5. Width of capture, m | 8 | 10 | 12 |
| 6. Depth of cultivation, mm | to 40 | to 40 | to 40 |
| 7. Number of working bodies (rake sections), pcs |
8 | 10 | 8 |
| 8. Length of the section, m | 1 | 1 | 1,5 |
| 9. Overall dimensions: | |||
| - in working position, to | |||
| length, mm | 2150 | 2200 | 2850 |
| width, mm | 8000 | 10000 | 12050 |
| height, mm | 1010 | 1010 | 1100 |
| - in transport position, to | |||
| length, mm | 2150 | 2200 | 2970 |
| width, mm | 4200 | 4200 | 4200 |
| height, mm | 2170 | 3400 | 3700 |
| 10. Road clearance | not less than 300 | not less than 300 | not less than 300 |
| 11. Weight of the structure, kg | 950 | 1050 | 1900 |
| 12. Aggregated with tractors, k.s. | 80-105 | 90-105 | 110-130 |
|
13. Number of attendants |
1 (tractor driver) |
1 (tractor driver) |
1 (tractor driver) |
|
14. Term of service, years |
5 | 5 | 5 |
Do you have questions about the operation of the unit?
Our managers will gladly help you! Call or write to us!
This is our companyreliabilityspeedmanufacturability
What are our customers saying?
Our managers are well versed in technical details
Call or write to us at the contacts indicated below
This email address is being protected from spambots. You need JavaScript enabled to view it.
22400, Ukraine, Vinnytsia region, Kalynyvka, str. Nezalezhnosti, 46
